Minimal design and clean lines make this bench a classic and neutral option that will go with any of our tables. Handmade from high-performance concrete and steel.
Lightweight high-performance concrete
Polished vs Natural // The difference between the 2 finishes is mainly aesthetics. Our polished finish goes through a 5-step diamond polishing process to create a almost mirror-like finish which enhances the mottling whereas the natural finish retains the look of natural concrete. Both finishes are manufactured with the same raw material and has the same sealer.
Concrete complexion in 4 shades of grey.
Concrete Grey /Smoke /Gunmetal /Graphite
*Please note this is an indication only, complexion might vary slightly due to various factors like humudity, temperature and curing times. It is a natural handmade product.
Standard Duco steel base colours
Technical specifications
Lightweight concrete // Our concrete weighs approximately half of conventional concrete with innovative and intelligent material composition. We do not use any steel or large aggregates in our product. We do not believe in ultra-lightweight as this will compromise durability and authenticity.
Ultra high-performance concrete (UHPC) // FLOAT concrete has compressive strength of between 85-95 mpa. Even more important our UHPC has extremely high flexural strength which gives our product the ability to withstand bending forces and gravity over time. Our reinforcing is a combination of anti-crack, glassfibre and xerox fibres giving our tables optimum performance. The surface is scratch resistant and our CrystalX waterproofing technology makes it stain resistant.
Cleaning and General Protection // We recommend that you use any mild detergent mixed with warm water and a microfibre cloth to clean the concrete.
General Maintenance // We recommend that the concrete surfaces be waxed with a Clear Furniture Wax every 6 months. In high usage areas the wax can be applied more often to ensure the protection and longevity of the sealer.
- Apply wax to the surface, leave it for 1 hour, buff using a microfibre cloth/ microfibre polishing pad or any automotive polishing pad until all the excess wax has been removed and the surface is shiny.
If you have any questions get in touch.